120 mm x 260 mm x 55 mm SIGMA QJ 324 N2 angular contact ball bearings

B1:mm; B:16 mm; with tapered bore:1206  ; Grease:0.220 kN; Pu:4.730 kN; rs Dynamic (Cr):1 mm; d:30 mm; Oil:11 000 min-1; Static (Cor):16.690 kN; D:62 mm;

B:25.00 mm; Basic Dynamic Radial Load Rating C:60500 N; Basic Static Radial Load Rating Co:38000 N; Grease Speed Rating n1:5600 rpm; D:100.0000 mm; Fillet Radius ra:1.50 mm; d:35.000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:7500 rpm;

d:45 mm; Limiting speed:6700 r/min; B:36 mm; Fatigue load limit Pu:20 kN; Calculation factor e:0.54; Dimension series:5FD; d1 ≈:76.13 mm; Basic dynamic load rating C:166 kN; a:29.905 mm; C:30 mm;

Q180°:2100 kN; bc:223.5 mm; Mass housing:595 kg; Appropriate attachment bolt, rec. tightening torque:3640 N·m; s:30 mm; A:430 mm; A1:390 mm; P150°:2700 kN; bb:191 mm; J6:1020 mm;

D:870 mm; da max.:685 mm; D1 ≈:781 mm; Mass bearing:636 kg; Operating clearance factor k2:0.097; Misalignment factor k1:0.115; ra max.:6 mm; Da max.:838 mm; da min.:562 mm; s1 max.:44.4 mm;

d1:98.9 mm; da min.:91 mm; Ball diameter Dw:14.288 mm; r1,2 min.:1.1 mm; Static axial stiffness, preload class B:132 N/µm; Preload class A GA:250 N; Preload class C GC:1000 N; Mass bearing:0.9 kg; Fatigue load limit Pu:2.65 kN; Preload class D GD:2000 N;

S:4.763 mm; End plug (suffix Y):EPR 19; Pa:46.3 kN; H:377.825 mm; da:160.338 mm; H1:190.5 mm; Bearing:22236 CCK/W33; P180°:202 kN; A2:314.325 mm; R2:41.275 mm;

b:11 mm; Static (Coa):178 kN; Dynamic (Ca):178 kN; B:37 mm; E:139.5 mm; F:96 mm; r1s (min):2.1 mm; d2:75 mm; Pu:20.680 kN; D:160 mm;

G:Tr 300x4; G2:G 1/4; d1:260 mm; A:9 mm; Mass withdrawal sleeve:21.5 kg; d:280 mm; Hydraulic nut:HMV 60 E; Nut for removal:HM 3160; G1:30 mm; B2:220 mm;

Basic Static Radial Load Rating Co:32500 N; Accessories:Two Seals & Snap-Rin; Oil Speed Rating Open/Shielded n2:7000 rpm; Basic Dynamic Radial Load Rating C:41000 N; Sealed Speed Rating n3:3600 rpm; B:20.00 mm; D:110.0000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; d

Hydraulic nut:HMV 88 E; d1:400 mm; Nut for removal:HM 3088; B2:196 mm; d:420 mm; G:Tr 440x5; G2:G 1/4; A:9 mm; B1:186 mm; G1:34 mm;

d:50 mm; B:20 mm; r, r1,2 min.:0.6 mm; F:55 mm; Mass inner ring:0.063 kg;

Mass bearing unit:0.78 kg; End cover:ECL 207; Hexagonal key size for grub screw N:3.969 mm; Thread grub screw G2:5/16-24 UNF; A5:28.8 mm; Bearing:YAR 207-104-2RFGR/HV; Thread size attachement end G:M10; Housing:SYFWK 507 L; Basic static load rating C0:15.3 kN; d:31.75 mm;

Grease Speed Rating n1:1500 rpm; Basic Static Radial Load Rating Co:610000 N; Basic Dynamic Radial Load Rating C:449000 N; B:116.00 mm; d:130.000 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; D:280.0000 mm; Oil Speed Rating n2:2000 rpm;

G:64.719 mm; d1:50.8 mm; Sleeve:S 13x2; Lock nut:N 13; B1:53.086 mm; Lock washer:W 13; B:14.554 mm; d3 max.:85.852 mm; Mass adapter sleeve assembly:0.64 kg; Hydraulic nut:HMVC 13E;